Genesis GLCS2065B Manual Del Operario página 5

IMPORTANT:
Please study them and learn their meaning for critical information to operate the tool safely.
SYMBOL DESCRIPTION
V
Volts
A
Amperes
Hz
Hertz
W
Watts
No Load Speed
kg
Kilograms
H
Hours
.../min
Per minute
SPECIFIC SAFETY RULES FOR CORDLESS CIRCULAR SAWS
WARNING:
familiarity with product (gained from repeated use)
replace strict adherence to product safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury!
WARNING:
gripping surfaces when performing an operation where
cutting tools may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts
of the tool "live" and shock the operator!
• DANGER! Keep hands away from cutting
area and blade.
• Do not reach underneath the workpiece.
The guard can not protect you from the blade below the
workpiece.
• Adjust the cutting depth to the thickness of
the workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
• Never hold the workpiece in your hands or
across your leg while cutting. Secure the
workpiece to a stable platform. It is important
to support the work properly to minimize body exposure,
blade binding, or loss of control.
• When ripping, always use a rip fence or
straight edge guide. This improves the accuracy
SYMBOLS
Some of the following symbols may be used on your product and appear throughout the manual.
SYMBOL DESCRIPTION
Revolutions per
RPM
minute
Strokes per
SPM
minute
Oscillations per
OPM
minute
Alternating
current
or A.C.
Direct current
or D.C.
Do not use in
wet conditions
Battery cannot
exceed 59 °C
Do not put
battery in fire
Do not let comfort or
Hold the tool by insulated
SYMBOL
Warning symbol. Precautions that involve
your safety
To reduce the risk of injury, read Operator's
Manual before using this product
Wear safety glasses, ear protection and
respiratory protection
Do not dispose with household waste
Do not touch the running blade
Class II Double Insulated construction
This symbol designates that this product is
listed with U.S. and Canada requirements
by ETL testing Laboratories, Inc.
of cut and reduces the chance of blade binding.
• Always use blades with correct size and
shape (diamond versus round) of arbor
holes. Blades that do not match the mounting
hardware of the saw will run off-centre, causing loss
of control.
• Never use damaged or incorrect blade
washers or bolt. The blade washers and bolt
were specially designed for your saw, for optimum
performance and safety of operation.
• Do not leave the tool running. Operate the tool
only when hand-held.
• Be aware that this tool is always in an
operating condition, because it does not have to
be plugged into an electric outlet.
• When operating the tool from an elevated
position, be aware of people or things beneath you.
• Always hold the tool firmly in your hands
before switching the tool "ON". The reaction
to the torque of the motor as it accelerates to full speed
may cause the tool to twist.
• Wear eye and hearing protection. Always
use safety glasses with side shields. Unless otherwise
specified, everyday glasses provide only limited impact
resistance, they are not safety glasses. Use only certified
safety equipment; eye protection equipment should
comply with ANSI z87.1 standards. Protective hearing
equipment should comply with ANSI s3.19 standards.
ENGLISH
DESCRIPTION
5