Blaupunkt VIO-NVR40 Guía Rápida página 6

4. Setting up your NVR
4.1. Installation
To turn ON the NVR connect the power supply to the power supply port. Then connect the
power supply cable to the power socket. The 3 Red Indicator lights will turn on and the
device will start booting. Connect the NVR to the router with an Ethernet cable. Wait until
the booting is completed and the NVR beeps once.
4.2. VIO-Web Player
Step 1:
Download and install the Cam4Home-Desktop-Web Player software for windows from our
website: http://service.blaupunkt-security.com
Step 2:
Select Series -> VIO-Series. Then select Filetype -> Software and press submit.
Step 3:
Now download the "VIO -- Cam4Home Desktop Webplayer - Software - EN".
Step 4:
Unzip the file "VIO_--_Webplayer_-_Software.zip" file then run the
Cam4Home Webplayer.exe .
Note: This software is for Windows only.
For users with MAC: Use a Network Scanner to identify the IP of the NVR and type it on
your Safari browser. Install our safari plugin and follow the steps from 4.3 onwards.
For users without a PC:
1. Connect a monitor display to the HDMI or VGA ports located at the back of the NVR. (for
more info refer to chapter 2 point 6 and 3 respectively)
2. Connect the mouse included to the USB port located at the back of the NVR. Additional
it is recommended to also connect a keyboard (not included) to the USB port. (for more
info refer to chapter 2 point 7)
3. Skip chapter 4.2 and continue with chapter 4.3.
Warning: Some steps maybe differ on the setup with a Monitor display compared to the
Web interface setup explained on this manual. For the "Back" function use the right click
of the mouse.
6