Descargar Imprimir esta página

Napoleon BI12 Manual De Instrucciones página 15

Ocultar thumbs Ver también para BI12:

Publicidad

Idiomas disponibles

Idiomas disponibles

t
g
e
he
rilling
xperience
Refer to this list every time you grill
Read Owner's Manual
Be sure to have read the owner's manual and all the safety instructions.
Clean grease tray
Always ensure you clean the grease tray prior to grilling to avoid fires and flare-ups.
Check the hose
Ensure the grill is off and cool. Check the hose for evidence of excessive abrasions,
or cuts. Have the hose replaced before use if the hose is damaged.
Preheat and clean grids
Coat the grids with vegetable shortening and preheat your grill to burn off excess
residue and prevent sticking. Clean cast iron grids with a brass wire brush and
stainless steel grids with a stainless brush. See "Cleaning Instructions".
NOTE: Stainless steel cooking grids are corrosion resistant and require less
maintenance than cast iron grids.
Prep area
Make sure everything you need while grilling such as your utensils, seasonings,
sauces, and dishes are within your reach. Don't leave your food unattended, or it
could burn.
Flip once and do not peek
Try not to open the lid and peek too much, or heat will escape and throw your
temperature and cooking times off. Flip your food only once, especially steak and
chicken.
Leave space
Leave some space on the grill and between food, so you have room to move food
around if you need to.
Use a thermometer
Use a thermometer to ensure food is cooked thoroughly. Follow the appropriate
temperatures guidelines for all types of meat, especially poultry.
h
ow to SeaSon caSt iron cooking gridS
This procedure MUST be done prior to first use and repeated every 3-4 uses to keep grids looking new.
1. Remove cast iron grids from the grill.
2. Wash grids with warm soapy water and soft cloth.
Pat dry and allow grids to completely dry.
3. Apply fat/oil evenly using a silicone brush on both
sides.
4. Preheat appliance to
350°F - 400°F (176°C - 204°C).
Napoleon.com | BUILT-IN Series
c
heckliSt
(
if applicaBle
)
5. Install cooking grids and cook for 30 minutes.
6. Apply a second even coat of fat/oil on cooking grids,
and keep cooking for 30 more minutes.
7. Grids are now seasoned.
NOTE: If rust has formed on the cast iron grids,
remove the rust with scouring pad or brass brush and
repeat the seasoning process.
GRILLING
PRO TIP!
Get inspired to create
delicious meals from the
recipes and grilling
techniques at
www.napoleon.com and
Napoleon's cookbooks.
GRILLING
PRO TIP!
Always preheat the grill
before cooking to burn
off leftover residue and
prevent food from sticking
to the grate.
OIL AND FAT
SUGGESTION!
Grapeseed Oil
Sunflower Oil
Soybean Oil
Extra Virgin Olive Oil
Canola Oil
If not available, select an oil
or fat that has a high smoke
point. Do not use salted fats
like butter or margarine.
Operation |
15

Publicidad

loading