Profi Cook PC-FW 1272 Manual De Instrucciones página 12

Assembly of the Cookie Attachment
You can shape different forms with this attachment after
preparing a cookie dough. This is especially suitable for
spritz biscuits.
• Please also refer to the illustrations under "D" (page 4).
• Please follow points 1 to 4 as described under "Prepa-
ration".
5. Insert the knife with the sharpened edge outwards onto
the shaft of the scroll.
6. Insert the coarse perforated disc. Note the recesses.
7. Place the biscuit attachment (14) in the cap.
8. Turn the shutter together with the biscuit attachment
clockwise onto the spiral housing.
9. Push the rail (15) through the slots on the biscuit
attachment.
Continue reading under "Electrical connection" & "Operation".
Electrical Connection
1. Check whether the mains voltage that you want to use,
corresponds with that of the appliance. You will find the
information about it on the rating plate.
2. Ensure that the switch (3) is set to " 0 " . The function
selector switch (4) must be disengaged.
3. Only connect the appliance to a properly installed safety
socket.
Switch Functions
Function Switch I / O (On / Reverse)
Use the function switch (4) to select the desired operating
mode for the switch (3).
WARNING:
• Always unplug the mains plug from the socket before cleaning.
Wait until the appliance has cooled down.
• Never immerse the motor assembly in water for cleaning. It
could result in an electric shock or fire.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
12
PC-FW 1272 v final
Switch ON / 0 / R (Forward / Off / Reverse)
The appliance is equipped with a forward and return
function. If the scroll should block, you can use the return
function, in order to release it.
- Forward
• Turn the function switch (4) to " I ".
• Turn the switch (3) to " ON ". The appliance is in the
"forward" mode.
- Reverse
• Turn the switch (3) to " 0 " and wait until the motor
stops.
• Turn the function switch (4) to " O " . Press " R " on the
switch (3). The appliance will be in the "reverse" mode
as long as you keep the switch pressed down.
- Switching Off
• Move the switch (3) to " 0 " and pull the power plug.
WARNING: Risk of Injury!
Always use the supplied tamper. Never insert your fingers
or tools into the filling neck!
CAUTION:
Do not use the appliance for longer than 10 continuous
minutes. Let it cool for 10 minutes before using it again.
1. Put the pieces of meat (meat paste / sausage mass or
dough) on the filling tray and into the filler neck.
2. Stuff, if necessary, the meat respectively the dough with
the tamper.
Ending Operation
1. Pull the mains plug out of the socket.
2. Disassemble all parts of the meat grinder.
3. Clean the parts used as described under "Cleaning".
Cleaning
Motor Unit
Only wipe the motor unit with a damp cloth and dry with a
dry cloth after.
Operation
02.08.23