Publicidad
Idiomas disponibles
Idiomas disponibles
1. on/off switch
2. auxiliary handle
3. spindle lock
4. wheel guard
5. grinding wheel
6. flanges
7. battery lock tab
8. battery Power indicators
9. spanner wrench
10. battery Pack
11. Charger
WARNING:
is switched off and the battery is disconnected before
adjusting, adding accessories, or checking a function
on the tool.
INSTALLING THE AUXILIARY
HANDLE
your grinder is equipped with a two-position auxiliary
handle. it can be mounted on either the left side or right
side of the die-cast gear housing. generally, a right-handed
operator will grip the body of the grinder with their right
hand and grip auxiliary handle, mounted to the left side of
the gear housing, with their left hand. the opposite gripping
and auxiliary handle placement is generally used by a left-
handed operator. occasionally, auxiliary handle placement
needs to be changed to accommodate the requirements or
restrictions of the operation being performed.
To install the Auxiliary Handle, simply securely screw the
handle into the threaded hole on the left side or right side
of the die-cast gear housing.
INSTALLING AND ADJUSTING THE
WHEEL GUARD (FIG 2)
your angle grinder comes with a tool-less adjustable wheel
guard (4).
To Mount the Guard
1.
Pull the guard locking lever (4a) to release the tension
on the guard clamp (4c).
2.
align the small protrusion on the inside of the wheel
guard clamp with the notch on the grinder's gear box
hub, then slip the guard's band onto the gear box hub.
PRODUCT OVERVIEW
2
3
6
5
ASSEMBLY AND ADJUSTMENTS
always be sure that the tool
1
11
rotate the guard to the correct position.
3.
Close the lever and make sure the clamp fits securely
on the gear box hub.
4.
if the guard moves freely after closing the clamp, adjust
the tension by turning the nut (4b).
4
4c
4a
To Adjust the Guard, Pull the guard locking lever (4a) to
loosen the guard clamp tension. rotate the guard to the
position desired, then close the lever to securely attach the
clamp to the gearbox hub.
WARNING:
grinder is intended for use with grinding wheels. other
accessories commonly used with this type of power tool
may require different types of guards. for your safety,
please check with the accessory provider concerning
availability of any required guard.
ENGLISH
7
4
FIG 1
4b
the guard included with this
8
10
9
FIG 2
7
Publicidad
