Content
Introduction ...............................17
Special instructions
for safe operating ......................17
Areas of Application ..................18
General Description ....................18
Scope of Delivery ............................ 18
Functional description ...................... 18
Overview ....................................... 19
Technical Data ............................19
Performance data ............................ 19
Notes on Safety .........................19
Symbols in the manual ..................... 19
Symbols on the equipment ............... 19
General notes on safety ................... 20
Initial Operation .........................22
Positioning/Hanging ....................... 22
Mains Connection ........................... 22
Connecting the Pressure Line ............. 22
Adjustment of the fl oat switch ........... 23
Set the length of
the fl oat switch cable ....................... 24
Manual mode ................................. 24
Operational start-up ........................ 24
Cleaning/Maintenance/Storage ..24
General cleaning instructions ............ 25
Clean foot part ............................... 25
Storage .......................................... 25
Waste Disposal/
Environmental Protection ...........25
Guarantee .................................25
Repair Service ............................27
Service-Center ............................27
Importer ....................................27
Troubleshooting .........................28
Replacement parts/Accessories ..28
Translation of the original
EC declaration of conformity .... 121
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a fi nal inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specifi ed.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Special instructions for
safe operating
• The equipment is not to be oper-
ated if there are people in the
water. There is a risk of electric
shock.
• Connect the equipment only to
a socket with a RCD (Residual
Current Device) with a rated
current of not more than 30 mA;
minimum fuse 6 amperes.
• If the mains cable of this device
is damaged, it must be replaced
by the manufacturer or their
GB
IE
17