Publicidad
Idiomas disponibles
Idiomas disponibles
EN
b
d
#
Symbol
Meaning
a
b
c
d
e
5. Reverse Mowing Button: Push to cut grass while
going in reverse.
6
ELECTRICAL SYSTEM
6.1
ELECTRICAL SYSTEM SAFETY
To reduce the risk of serious personal injury from fire or
electric shock when working on the electrical system:
•
Always remove the start key and batteries, and read
operator manual before working on this product.
•
Always remove the start key and batteries when
transporting the product.
•
Keep the product free of grass clippings, leaves
and other debris. DO NOT use water to clean the
product. Use only compressed air. Wear adequate
eye and hearing protection when cleaning the
product.
•
Always wear protective gear (safety glasses, face
shield and gloves) when working with the battery.
Use insulated tools.
•
Clean the product of all dirt and debris. Do not use
solvents, hard cleaners or abrasives.
•
Keep the area clear of bystanders when engaging
the PTO switch.
•
Never allow flames, sparks or smoking near the
product or batteries.
•
Keep the product and batteries out of reach of
children.
e
Battery level
Working hours indicator
Check controller, battery, or motor
Error details/ Product status: Drive
(D), Neutral (N), Reverse (R) and
Reverse mowing (RM)
Error code/ Total working hours
English
•
Always keep protective shields, covers and guards
in place and securely fastened. If they become
damaged, repair or replace immediately. Never
modify or remove safety devices.
6.2
ELECTRICAL SYSTEM
a
INFORMATION
c
The product is powered by a 60-volt / 80-volt electrical
system. It consists of the following components:
1. Blade and drive controller (1)
2. Blade motor (1)
3. Accelerator (1)
4. Digital display (1)
5. Wheel motor (1)
6. Battery compartment (2)
7. Headlights (2)
7
OPERATION
This section describes how to operate the product.
CAREFULLY READ AND UNDERSTAND
THE SAFETY CHAPTER AND OPERATION
INSTRUCTIONS BEFORE YOU OPERATE THE
PRODUCT.
7.1
BEFORE OPERATION
7.1.1 CONNECT THE BATTERIES TO THE
PRODUCT
Only use genuine Greenworks batteries with the
product.
1. Make sure that the batteries are fully charged.
2. Press the release button (1) to open the battery
cover.
16
WARNING
WARNING
1
Publicidad
