Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
EN
Switching Modes
Press the mode switch
to switch among the Auto mode, Turbo mode and the Suction
mode according to your needs.
Cleaning the Used Water Tank
Press the Used Water Tank release button to take out the tank. Remove the tank cover
and pour out the used water. Close the tank cover and re-install the tank before use.
2
1
One-Press Self-Cleaning
1. Place the appliance back onto the base while you finish cleaning. Ensure that the
water in the Clean Water Tank is sufficient for self-cleaning.
2. Briefly press the self-cleaning button on the top of the handle to start/stop self-
cleaning.
3. Please empty the Used Water Tank after self-cleaning is completed and drying mode
has been engaged. Press the button
Note: The self-cleaning function can be enabled only when the appliance is being charged and the
battery level is more than 20%.
9
9
4
3
to exit the drying mode.
How to Use
Drying Mode
Press and hold self-cleaning button
1.
2.
The appliance will be charged once drying is completed.
Note:
• After self-cleaning is complete, promptly clean the Used Water Tank. Clean the charging base if
there are any stains left on the base.
• If cleaning the brush roller manually, please air-dry it thoroughly or dry it by using drying mode
several times to ensure a good drying effect.
for 3 seconds to activate drying mode.
EN
10
10
Publicidad
