Descargar Imprimir esta página

EVBOX Livo Manual De Instalación Y De Usuario página 12

Cable

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 123
EN
1.4. Certification and compliance
Note
See
EU Declaration of Conformity on page 39
2. Safety
2.1. Safety precautions
DANGER
Not following the installation and user instructions given in this manual will result in the risk of electric shock, which
will cause severe injury or death.
Read this manual before installing or using the charging station.
DANGER
Installation, servicing, repair and relocation of this charging station by a non-qualified person will result in the risk of
electric shock, which will cause severe injury or death.
Only a qualified electrician is permitted to install, service, repair, and relocate the charging station.
The user must not attempt to service or repair the charging station as it does not contain user-serviceable
parts.
Local regulations may be applicable and may vary depending on your region or country of use. The qualified
electrician must always ensure that the charging station is installed according to the local regulations.
DANGER
Working on electric installations without proper precautions will result in the risk of electric shock, which will cause
severe injury or death.
Switch off the input power before installing the charging station.
Do not switch on the charging station if it is not fully installed or not secure.
Do not install a charging station that is faulty or has a noticeable issue.
DANGER
Operating the charging station when it is damaged or worn will result in the risk of electric shock, which will cause
severe injury or death.
Do not operate the charging station if the power supply, the enclosure or an EV connector is broken, cracked,
open, or shows any other indication of damage.
Do not operate the charging station if a charging cable is frayed, has broken insulation, or shows any other
indication of damage.
In the event of danger and/or an accident, have the electrical supply to the charging station disconnected
immediately.
Contact your installer if you suspect that the charging station is damaged.
8
The charging station has been CE-certified by the manufacturer and bears the CE logo. The
relevant declaration of conformity may be obtained from the manufacturer.
Electrical and electronic appliances, including accessories, must be disposed of separately from
the general municipal solid waste.
Recycling of materials saves raw materials and energy and makes a major contribution to
conserving the environment.
for the Declaration of Conformity for this product.
2. Safety

Publicidad

loading