Husqvarna 40-C1000X4 Manual De Usuario página 3

Note:
Other symbols/decals on the battery charger
refer to certification requirements for some commercial
areas.
SAFETY DEFINITIONS
Warnings, cautions and notes
are used to point out specially
important parts of the manual.
WARNING: Used if
there is a risk of
injury or death for the
operator or bystanders
if the instructions in the
manual are not obeyed.
CAUTION: Used if there
is a risk of damage to the
product, other materials
or the adjacent area if
the instructions in the
manual are not obeyed.
Note: Used to give more
information that is necessary in
a given situation.
Important safety
instructions
WARNING: Read all
safety warnings and all
instructions. Failure to
obey the warnings and
2315 - 001 - 13.03.2024
Safety
instructions may result
in electrical shock, fire
and/or serious injury.
• Only use the battery charger
40-C1000X4 to charge
Husqvarna original 36 V
batteries. Refer to
data on page 6 for specific
batteries.
• Do not insert any object
into the cooling slots of the
charger.
• Do not try to disassemble or
repair the battery charger.
• Do not use other power cords
than the one supplied for your
product.
• Regularly examine that the
power cord is not damaged.
Immediately disconnect the
battery charger if the power
cord is damaged.
• Do not lift the battery
charger by the power cord.
To disconnect the battery
charger from a power outlet,
pull out the power plug. Do
not pull the power cord.
• Keep all cables and extension
leads away from water, oil
and sharp edges. Make sure
Technical
3