Publicidad
Idiomas disponibles
Idiomas disponibles
Assemble Grill
IMPORTANT: Remove all packing material prior to assembly/
use.
During assembly, grill lid should be latched and grill should
lie on carpet or cardboard.
1.
Inspect and remove all components from package. (Fig. 3)
2.
See carton for parts and hardware included with your unit.
Fig. 3
3.
Pull outward to release the lid latch, and open the lid. (Fig. 4
and Fig. 5)
Fig. 4
4.
Remove the cooking grates and the cooktops and set aside.
(Fig. 6 and Fig. 7)
Fig. 6
5.
Align and slide the side table onto the pre-assembled
support pins at the right side of the grill. (Fig. 8)
6.
Attach the side table by using two washers and two screws.
(Fig. 9)
X 2
X 1
7.
Replace the cooktops and cooking grates, and then close
and latch the grill lid.
A (2)
NOTE: In order to operate lid latch, first pull latch up and
outward into open position before lid is closed. Close lid and
B (2)
move latch to closed position.
8.
Turn over the grill and place onto a soft surface.
C (1)
9.
Extend the legs and put the ends of the left leg into leg
brackets (Step a in Fig. 10). Attach the right leg to the grill
base with bolt C. (Step b in Fig. 10)
Left leg
b
Fig. 5
C
10. Attach each wheel to axle using one bolt and one washer.
(Fig. 11)
Fig. 7
Fig. 8
English - 5
A
Leg brackets
a
Fig. 10
B
Fig. 11
Fig. 9
Publicidad
