Bergstrom INTEGRAL POWER II Instrucciones De Montaje página 30

INTEGRAL POWER II
EN
Important: Due to the unit's complex
4
electronic system, the power connection must
be made directly to the vehicle's battery.
Important: Check the User Manual before
starting up.
Connection to alternator cable for unit operation with
Caution: The cable will be installed in all
!
vehicles for the unit to work with the engine
started up.
Position excitation cable on the inside or
1
outside of the vehicle as appropriate, and
secure the front with the supplied self-tapping
screws. Connect switches as shown.
Air speed
switch
8
+
the engine running
On the inside
-
1
A/C switch
30
On the outside