Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Make sure that the hedge sweeper is not damaged. Replace the hedge sweeper
if it is damaged.
Make sure that the screws that hold the cutter blades together are correctly
tightened.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
User interface
Problem
Possible faults
Green LED flashes.
Low battery voltage.
Red LED flashes.
Overload.
Temperature deviation.
The power trigger and the start button are
pushed at the same time.
Green LED and red
Battery is empty.
LED flash alternately
Battery is damaged.
20
To examine the blade
1. Clean the blade from unwanted materials with an
anti corrosion cleaning agent before and after you
use the product.
2. Examine the edges of the blade for damages and
deformation.
3. Use a file to remove burrs on the blade.
4. Make sure that the blades move freely.
To clean and lubricate the blades
1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note:
Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.
Troubleshooting
Possible solution
Charge the battery.
The cutting attachment cannot move freely.
Release the cutting attachment.
Let the product become cool.
Release the power trigger and push the start
button.
Charge the battery.
Speak to your service dealer.
Before
Weekly
Monthly
use
X
X
X
X
X
2200 - 004 - 03.11.2023
Publicidad
