Create Wind Stylance Manual De Instrucciones página 13

• Raise the canopy to hanging bracket, aligning loosened screws in hanging bracket with slotted
holes in the canopy.
• Twist the canopy to lock. Re-insert the screws and secure all the screws with a screwdriver.
• With hanging bracket secured to the outlet box and able to support the fan, you are now ready
to hang your fan.
• Grab the fan firmly with two hands. Slide downrod through the opening in the hanging bracket
and let the hanging ball rest on the hanging bracket.
• Turn the hanging ball slot until it lines up with the hanging bracket tab.
Tip: Seek the help of another person to hold the stepladder in place and to lift the fan up to you
once you are set on the ladder.
B L A DE S AS SE MB LY
Align the holes on the blade holder with the holes on the blades and the motor body and screw
them in place, but don't tighten them until they are all placed and screwed in.
Tip: To save time, you can fit the washers on each screw prior to installing the blades.
1
C O NNECTION S PANE L AS SE MB LY
Connections panel
Attach the connections plate up to the bottom of the fan by inserting the set screw heads into
the key hole slots. Rotate them to place and tighten them to secure the plate.
2
Panel screws
E NGLI SH
13