Metabo MKS 18 LTX BL 58 Manual Original página 16

en ENGLISH
Press in the spindle locking button (20) and hold in
place. Turn the saw spindle slowly with the spanner
in the saw blade fixing screw (21) (15)until the lock
catches.
Unscrew the saw blade fixing screw in anti-
clockwise direction and remove the outer saw blade
flange (22). Pull back the movable guard (26) and
remove the saw blade.
Ensure that the inner saw blade flange (25) is
inserted in the right way: The inner saw blade
flange (25) has 2 sides, diameter 20 mm and 5/8"
(16 mm). Ensure a precise fit of saw blade mounting
hole to the inner saw blade flange (25)! Incorrectly
installed saw blades do not run smoothly and lead
to loss of control.
Insert a new saw blade, Make sure the direction of
rotation is correct. The direction of rotation is
indicated by arrows on the saw blade and guard.
The contact areas between the inner saw blade
flange (25), the saw blade (23), the outer saw blade
flange (22) and the saw blade fixing screw (21) must
be clean.
Put on the outer saw blade flange (22). Ensure that
the outer saw blade flange (22) is inserted the
correct way round (inscription facing outwards).
Tighten the saw blade fixing screw (21) using a
hexagon wrench (15) (max. 5 Nm).
Use only sharp, undamaged saw blades. Do
not use saw blades that are cracked or that
have changed their shape.
Do not use any saw blades made from high-
alloy high-speed steel (HSS).
Do not use any saw blades which do not
conform to the specified rating.
Use only saw blades with a diameter according to
the markings on the saw.
The saw blade must be suitable for the no-load
speed.
Use a saw blade that is suitable for the
material being sawn.
Use only genuine Metabo - saw blades.
Never use abrasive grinding discs.
Use only saw blades that are marked with a
speed equal or higher than the speed marked
on the tool.
Use only saw blades recommended by the
manufacturer, which conform to EN 847-1
because it is intended for wood and analogous
materials.
Regularly check the function of all blade guard
operations before use and storage.
9. Cleaning
Remove battery pack from machine.
Danger of injury from hot or sharp shavings.
Wear protective gloves when emptying the
shavings collection box (1)
16
Empty the shavings collection box (1) regularly:
open the lid and shake out shavings. The shavings
collection box can be removed from the machine if
necessary. To attach, place the shavings collection
box on the guard and press until it snaps into place.
Clean the machine regularly. Make sure that the
safety appliances, e.g. the movable guard, are in
perfect working order.
f
10. Accessories
Only use original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
Battery packs with different capacities. Buy
battery packs only with voltage suitable for your
power tool.
Order no.: 625367000 4.0 Ah (LiHD)
Order no.: 625368000 5.5 Ah (LiHD)
Order no.: 625369000 8.0 Ah (LiHD)
etc.
Order no.: 6.25027000 4.0Ah (LiPOWER)
Order no.: 6.25028000 5.2 Ah (LiPOWER)
etc.
Chargers: ASC 55, ASC 145, etc.
See page 4.
A Guide rail
B Clamp. To secure the guide rail.
C Circular saw blade for metal applications
For a complete range of accessories, see
www.metabo.com or the catalogue.
11. Repairs
Repairs to electrical tools must ONLY be
carried out by qualified electricians!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. See
www.metabo.com for addresses.
You can download a list of spare parts from
www.metabo.com.
12. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Packaging materials must be disposed of according
to their labelling in accordance with municipal
guidelines. Further information can be found at
www.metabo.com in the "Service" section.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.