Functional Description; Name Of Parts; Specifications - Hitachi GP 2 Manual De Instrucciones

FUNCTIONAL DESCRIPTION

NOTE:
The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first
read and understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool.

NAME OF PARTS

Bearing lid
(B)
Collet
chuck
Spindle

SPECIFICATIONS

Motor
Power Source
Current
No-Load Speed
Max. Wheel Diam.
Collet Check Capacity
Weight
WARNING:
Switch
Nose bracket
Inner cover (B)
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60Hz / DC
4.7A
25,000 / min
1" (25 mm)
1/4" (6.35 mm)
4.3 lbs (1.95 kg)
NEVER use an abrasive wheel, cutting wheel, or any wheel
greater than 1" in diameter. Using such wheels can result in
wheel breakage, and will otherwise increase the risk of bodily
injury from contact with the wheel or wheel fragments.
Tail cover
Housing
Fig. 1
English
Brush cap
9