Publicidad
Idiomas disponibles
Idiomas disponibles
Do not expose the device to extreme cold conditions.
Avoid heavy impacts and vibrations.
If the USB cable or the device is damaged, or if liquids or foreign
bodies get into the device, unplug the device from the USB port
immediately.
...
Installation location/surroundings
In the first few hours of use, new products may give off an unavoidable
but totally harmless smell which will wear off with time.
We recommend you ventilate the room regularly to help dissipate
this odour. We have taken appropriate measures during the
development of this product to ensure that levels are well below the
prescribed legal limits.
The device is equipped with non-slip plastic feet. Since furniture is
coated with a variety of varnishes and plastics which are cleaned with
different cleaning agents, it cannot be completely excluded that some
of these cleaning agents contain ingredients which might damage the
plastic feet and cause them to become soft.
If necessary, place a non-slip mat under the device.
To prevent the device from falling, only install and operate it and its
components on a sturdy, level and vibration-free surface.
During the set-up process, maintain a minimum distance of cm
around the device for sufficient ventilation.
Ventilation must not be impeded by covering the device with objects
such as mag azines, table cloths, curtains etc.
Do not place the device near direct heat sources (e.g. heaters) that
could affect it.
Do not place naked flames (e.g. lit candles) on or near the device.
Do not throw the device into a fire, and do not short-circuit it or
dismantle it.
Do not place any objects on the cables as they may be damaged.
Only use the device in living rooms or similar.
English -
Publicidad
