For indoor use.
Level of pollution: 2.
Altitude: <2000 m.
3.7. CHARACTERISTICS OF
CONSTRUCTION
Overall dimensions
■ Housing: 100 x 60 x 20 mm
■ Connecting cable: 0.70 m
■ Sensor
Length
Clamping
diameter
Mass of the device: approximately 130 g.
Batteries mass: approximately 2 x 26 g
Index of protection: IP 40 per IEC 60529
Afterflame time: V0 (per UL 94)
The flexible coil is resistant to oils and aliphatic hydrocarbons.
3.8. COMPLIANCE WITH INTERNATIONAL
STANDARDS
Electrical safety per IEC/EN 61010-2-032 or BS EN 61010-
2-032 for type B sensors. Rated voltage 600 V with respect
to earth in category IV.
Double insulation:
3.9. ELECTROMAGNETIC COMPATIBILITY
Emissions and immunity in an industrial setting compliant
with IEC/EN 61326-1 or BS EN 61326-1 for portable devices.
Except for the fuse and the batteries, the instrument
contains no parts that can be replaced by personnel who
have not been specially trained and accredited. Any
unauthorized repair or replacement of a part by an
"equivalent" may gravely impair safety.
4.1. CLEANING
Disconnect everything connected to the instrument and
switch it off.
170 mm
45 mm
IK 04 per IEC 62262
4. MAINTENANCE
250 mm
70 mm
26
1000 mm
320 mm