universalblue UBE2423-23 Manual De Instrucciones página 49

• Beware of hot surface 'H' will show
which cooking zone is hot to touch. It
will disappear when the surface has
cooled down to a safe temperature. It
can also be used as an energy saving
function if you want to heat further
pans, use the hotplate that is still hot.
See picture 20 on page 9.
Functions
Boost function
Boost is the function that one zone rising
to a larger power in one second and lasting
for 5 minutes. Then you can get a more
powerful and faster cooking. Using the
Boost to get larger power.
• Touch the heating zone selection button
that you wish to boost, an indicator
next to the key will flash. See picture 18
on page 9.
• Touch the Boost button, the heating
zone will begin to work at Boost mode
• The power display will show "P" to
indicate that the zone is boosting. See
picture 21 on page 9.
• The Boost power will last for 5 minutes
and then the zone will go back to the
power stage which was set before
boost. See picture 22 on page 9.
• If you want to cancel the Boost during
this 5 minutes, touch the heating zone
selection button, an indicator next to
the key will flash. And then touch the
Boost button. The heating zone will go
back to the power stage which was set
before boost. See picture 23 on page 9.
For model UBE2423-23 / UBE2424-23
In this hob every zone can work with Boost
function. If you need to use boost, please
switch off the other zone in the same group
first. Otherwise the "P" and "9".
symbols will flash on the display of the
selected zone and power level "9" will be
automatically set to full power.
When not using boost function, you can
use all four zones at the same time.
For model UBE2401-20 ,UBE2422-23 and
UBE2406-21
The three (or four) zones were divided into
two groups. In one group, if use boost on
one zone, first make sure that the other
zone is working on/below power level 5.
When you select one zone and press 'boost'
button, if the other zone is working above
power level 5, the "P" and "9" symbols will
flash on the display of the selected zone
and power level 9 will be set automatically.
See picture 24 on page 10.
Keep warm function
Keep warm function is suitable for keeping
food warm without continue cooking.
• Using the keep warm to get stable
temperature
• Touch the heating zone selection button
that you desire to use keep warm, an
indicator next to the key will turn on.
See picture 25 on page 10.
• Touch the button, the cooking zone
indicator will display "A". See picture
26 on page 10.
• If you want to cancel the keep warm,
touch the heating zone selection button,
and then touch the butto. The heating
zone will go back to "0" power stage.
See picture 22 on page 9.
Pause functions
UBE2422-23 models)
Pause function can be used at any time
during cooking. It allows to stop the
induction cooktop and come back to it.
• Make sure the cook zone is working.
• Touch the button STOP&GO, the cooking
zone indicator will show "II". And the
operation of the induction cooktop will
be deactivated within the scope of all
cooking zones, except the STOP&GO,
on/off and lock keys.
• To cancel the pause status, touch the
button STOP&GO, then the cooking zone
will go back to the power stage which
you set before.
"BBQ" function (model UBE2401-20)
BBQ is the function that is used at the
flexizone mode which will allow the pan
surface temperature stay at a reasonable
level.
EN
(UBE2401-20 and
49