universalblue UBE2423-23 Manual De Instrucciones página 51

to standby in 1 minute. The fan will keep
cooking down the induction hob for a
further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection
function for your induction hob. It shut
down automatically if ever you forget to
turn off your cooking.
When the pot is removed, the induction hob
can stop heating immediately and the hob
automatically switch off after 1 minutes.
People with a heart pace maker
should
doctor before using this unit.
Timer
You can use that in two ways:
• You can use it as a minute minder. In
this case, the timer will not turn any
cooking zone off when the set time is
up.
• You can set it to turn one cooking zone
off after the set time is up.
• You can set the timer up to 99 minutes.
Using the timer as a minute minder
You can use the timer in two different
ways:
• Make sure the cooktop is turned on.
Note: you can use the minute minder even
if you're not selecting any cooking zone.
• Touch timer control , The minder
indicator will start flashing and "30"
will show in the timer display. See
picture 28 on page 10.
• Set the time by touching the "-" or "+"
control, the minute minder indicator
will start flashing and will show in the
timer display. See picture 29 on page 10.
• Hint: Touch the "-" or "+"control once to
decrease or increase by 1 minute.
• Hold the "-" or "+" control of the
timer to decrease or increase by 10
minutes.
consult with their
• Touch the 'Timer', the timer is cancelled,
and the"00"will show in the minute
display. See picture 30 on page 10.
• When the time is set, it will begin to
count down immediately. The display
will show the remaining time and the
timer indicator will flash for 5 seconds.
See picture 31 on page 10.
• Buzzer will bips for 30 seconds and the
timer indicator shows "- - " when the
setting time finished. See picture 28 on
page 10.
Setting the timer to turn one cooking zone
off
Cooking zones set for this feature will:
• Touching the heating zone selection
control that you want to set the timer
for. See picture 32 on page 10.
• Touch timer control , The minder
indicator will start flashing and "30"
will show in the timer display. See
picture 31 on page 10.
• Set the time by touching the "-" or "+"
control, the minute minder indicator
will start flashing and will show in the
timer display. See picture 33 on page 11.
• Hint: Touch the "-" or "+" control once
will decrease or increase by 1 minute.
• Touch and hold the "-" or "+" control, the
timer will decrease or increase by 10
minutes.
• When cooking timer expires, the
corresponding cooking zone will be
automatically switch off and show "H".
See picture 20 on page 9
Other cooking zone will keep operating if
they are turned on previously.
Setting the timer to turn more than one
cooking zone off
If use this function to more than one
heating zone, the timer indicator will show
the shortest time.(e.g. zone 1# setting time
of 3 minutes, zone 2# setting time of 6
minutes, the timer indicator shows "3".)
Note: The flashing red dot next to power
level indicator means the timer indicator
is showing time of the heating zone.
If you want to check the set time of other
EN
51