Publicidad
Idiomas disponibles
Idiomas disponibles
Planer thicknesser
2.1.
a) The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b) Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c) Do not touch the device with wet or damp hands.
d) Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges, or moving parts. Damaged or tangled cords increase the risk
of electric shock.
e) Do not use the unit if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
f) To avoid electric shock, do not immerse the cable, plug, or the appliance itself
in water or other liquid. Do not use the product on wet surfaces.
g) Do not use the device in rooms with very high humidity / in the immediate
vicinity of water tanks!
h) Do not allow the machine to get wet. Risk of electric shock!
i) Before the initial use, please check whether the type of current and mains
voltage corresponds to those indicated on the rating plate.
2.2.
a) Keep the work area tidy and well-lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing, and use common sense
when using the unit.
b) Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases, or dust. The unit produces sparks that can ignite dust
or fumes.
c)
If you find any damage or irregularities in the operation of the product,
immediately turn it off and report it to an authorized person.
d) If you have any doubts as to whether the unit is working properly or if it is
damaged, contact the manufacturer's service department.
Electrical safety
Safety in the workplace
EN
Publicidad
