MSW Motor Technics MSW-WOBD-1500L Manual De Instrucciones página 41

3.3.3 Processing by planing
IMPORTANT: for a better planing/levelling effect, process the piece of wood along
its grain structure. Raw wood requires processing of all 4 sides. Use the attached
pusher and gripper to move the piece of wood. Never remove wood parts or
cuttings from the worktop when the machine is running, especially from around
the blade.
The depth of the plough is regulated by a knob (13) at the receiving worktop.
•
It is recommended to set the depth as not greater than 1 mm and not smaller
than 0.5 mm - see indicator (15).
Make sure that the guide (8) is at the right angle - for regular planing, it will be
•
90 .
o
• Move aside the blade guard (9) and place the piece on the worktop so that it
rests tightly on the guide, with the leading edge at a short distance from the
EN