Publicidad
Idiomas disponibles
Idiomas disponibles
USAGE INFORMATION
Thermostat setting
Thermostat automatically regulates the inside temperature of the refrigerator compartment and freezer
compartment. By rotating the knob from position 1. to 5., colder temperatures can be obtained.
•
For short-term storage of food in the freezer/refrigerator compartment, you can set the knob between
minimum and medium position.(1-3)
•
For long-term storage of food, you can set knob to medium position.(3-4)
Note that; the ambient temperature, temperature of the freshly stored food and how often the
door is opened, affects the temperature in the refrigerator compartment. If required,change the
temperature setting.
The freezer**** of the refrigerator can cool up to -18°C and more.
The thermostat automatically regulates the temperature inside the cooler and freezer compartments.
Refrigerator temperatures can be obtained by rotating the knob to higher numbers; 1 to 3, 1 to 5 or SF
(Maximum numbers on the thermostat depends on your product.)
Thermostat settings:
1 – 2 : For short-term storage of food
3 – 4 : For long-term storage of food
5 : Maximum cooling position. The appliance will work
longer.If required, change the temperature setting.
If device has SF position:
•
Turn the knob to SF to freeze fresh food quickly. In
this position, the freezer compartment will operate at
lower temperatures. After your food freezes, turn the
thermostat knob to its normal use position. If you do
not change the SF position, your appliance work will automatically return to its last used thermostat
position according to the time indicated in the note. Return the thermostat switch to the SF position
and return it to normal use according to the time indicated in the note.If the thermostat switch is in the
SF position when your appliance is first started, your appliance work will automatically return to the
operation in the thermostat-3 position according to the time indicated in the note.
The super mode will be cancel automatically after max 48 hours.
If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting or re-plugged the unit in order not to damage the compressor.
Temperature Settings Warnings
•
It is not recommended that you operate your fridge in environments colder than 10°C in terms of its
efficiency.
•
When setting the thermostat, take into consideration how often the appliance door is opened and
closed, how much food is stored in the refrigerator, and the environment in which the refrigerator is
located.
•
When the appliance is first switched on, allow it to run for 24 hours in order to reach large quantity of
food inside. operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
•
Unplug your appliance during a power cut to prevent damage to the compressor. Once power is
restored, delay plugging in your appliance for 5 to 10 minutes. This will help prevent damage to the
appliance's components.
•
Your appliance is designed to operate in the ambient temperature ranges stated in the standards,
according to the climate class stated in the information label. It is not recommended that your fridge is
operated in the environments which are outside of the stated
temperature ranges. This will reduce the cooling efficiency of
the appliance.
•
This appliance is designed for use at an ambient temperature
within the 16°C - 32°C range.
Lamp cover
Climatic Class
EN - 11
Thermostat knob
(The images are representative)
Amb. T. (°C)
SN:
From 10 to 32 °C
ST:
From 16 to 38 °C;
N:
From 16 to 32 °C
T:
From 16 to 43 °C
Publicidad
