Descargar Imprimir esta página

Husqvarna BMR 25P Manual Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

21. Propane tank valve
22. Tension wrench
Control panel overview
2
1
3
4
1. Emergency stop button
2. "Freeflow" button to lower the shot blaster head
3. ON/OFF button for work lights
4. Button to lift the shot blaster head
5. Button to engage the clutch
6. Button to disengage the clutch
7. Button to open the valve for the abrasive material
8. Button to close the valve for the abrasive material
9. Movement control lever
10. Engine RPM control
11. Indicator for replacement of primary filters
12. Indicator for low oil pressure
13. Indicator for faults
14. Ignition key
15. Tachometer (RPM) and display for engine operation
hours
16. Speed level indicator (ft/min)
Symbols on the product
Warning: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
High voltage.
4
5
6
7
8
16
11
12
13
14
9
15
10
Keep all parts of your body away from hot
surfaces.
Lifting point.
Keep hands away from rotating parts.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use an approved respiratory protection.
Use approved hearing protection.
Use approved eye protection.
Use approved protective gloves.
Use approved protective boots.
Hot surface.
Risk of fire or explosion.
2272 - 001 - 14.05.2024

Publicidad

loading

Este manual también es adecuado para:

970 69 34-01