Chicago Pneumatic FRL 1/2 BSP Instrucciones Del Producto página 12

Operation
Filling the Oil Reservoir Automatically
The system must be under pressure to fill the reservoir automatically.
To fill the oil reservoir automatically:
1. Connect the oil hose to the oil reservoir (3) nozzle (connection thread G1/8"), and immerse the hose in speci-
fied oil.
2. Press the oil top-up button (1) until the oil reaches the mark (2) on the reservoir (3).
The oil hose may remain connected to the oil reservoir.
12
EN
© Chicago Pneumatic - 6159990240
Air Filter - Regulator - Lubricator