Publicidad
Idiomas disponibles
Idiomas disponibles
RS232 CONNECTION DIAGRAM
RS232 port connection diagram
SYSTEM CONFIGURATION
Boot-up interface:
Turn on the unit, the screen will show the message "Please Wait, Loading..." as shown in
the image
Once booting is complete, the screen will inform you of the name of the Wi-Fi link offered
by the unit, by default HMlink-xxx (note if the factory settings have not been changed).
Once booting is complete, the screen will inform you of the name of the Wi-Fi link offered
by the unit, by default HMlink-xxx (note if the factory settings have not been changed).en
el caso de que usted ya haya grabado o memorizado algun parametro con un nombre
predeterminado (por ejemplo "Salon de eventos) lo mostrar al iniciar la unidad
If for 15 seconds, no button on the front panel is manipulated, the screen will enter
standby or information mode.
Input channel configuration:
The control keys (fig7) arranged in alphabetical order (depending on version) correspond
to the input settings. These keys have 2 functions:
1. If you briefly press the key (example A), the red LED housed therein will illuminate,
indicating that you have activated the MUTE function for that channel. If you press briefly
again, the LED will turn off, leaving said channel open.
2. If you press long (more than 2 seconds) the unit enters channel editing mode (a red
LED will light up at the top of the channel vumeter (Fig6) indicating the channel that is
going to be modified. If you press again Perform a long press, the vumeter LED (Fig6) will
light up, indicating that the channel is free
www.audibax.com
ADP 24 DSP / ADP 36 DSP / ADP 48 DSP
Please wait
Loading......
HMLink-xxxx
Send Data OK
WIFI:
Mode:1
Name:USER1
6
Publicidad
