Descargar Imprimir esta página

Bosch PSR 14-40 LI-8 Manual Original página 13

Ocultar thumbs Ver también para PSR 14-40 LI-8:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
Hold the power tool securely. When tightening and
u
loosening screws be prepared for temporarily high torque
reactions.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Technical Data
Cordless drill/driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque, hard/soft screwdriving applica-
tion according to ISO 5393
Max. drilling diameter
– Steel
– Wood
Tool holder
Max. screw diameter
Weight according to EPTA-Procedure
01:2014
Permitted ambient temperature
– during charging
B)
– during operation
and during storage
Bosch Power Tools
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Slider
(4)
Right rotational direction indicator
(5)
Left rotational direction indicator
(6)
Battery release button
A)
(7)
Battery
(8)
Light
(9)
Battery charge indicator
(10) Rotational direction switch
(11) On/off switch
(12) Handle (insulated gripping surface)
(13) Universal bit holder
A)
(14) Screwdriver bit
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
PSR 14.4 LI-2
PSR 144 LI-2
PSR 14-40 LI-8
3 603 J73 4..
V=
14.4
-1
min
0–390
-1
min
0–1300
Nm
40/20
mm
mm
mm
1.0–10
mm
kg
1.1
°C
0 to +35
°C
-20 to +50
English | 13
A)
A)
PSR 18 LI-2
PSR 18-00 LI-10
3 603 J73 3..
18
0–400
0–1340
A)
46/25
10
10
30
35
1.0–10
8
10
A)
1.3
0 to +35
-20 to +50
1 609 92A 4WF | (09.05.2019)
A)
A)

Publicidad

loading

Este manual también es adecuado para:

Psr 144 li-2Psr 18 li-2Psr 18-00 li-10