Bresser ClimaTrend Hygro Quadro Manual De Instrucciones página 24

(2) MIN/MAX / - button
A. In normal mode, press and hold it more
than 3 seconds to switch °C and °F.
B. Press this button, MAX appears on the
display.
C. On the display appear the maximum
values since the last reset.
D. Press and hold the MIN/MAX- button to
delete the maximum values of the current-
ly selected channel.
E. Press this button again
F. MIN appears on the display
G. On the display appear the minimum values
since the last reset.
H. Press and hold the MIN/MAX- button to
delete the minimum values of the currently
selected channel.
I. Press again to go back to the display of the
present values.
24
Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 24 Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 24
NOTE: Press and hold the MIN/MAX /- or
CHANNEL / + button for a fast running.
SETTING THE ALARM FOR TEMPERATURE
AND HUMIDITY
1. Temperature alarm
(1) Press the CHANNEL /+ button until the
arrow appears on the desired channel
(channel 1-3, IN)
(2) Press and hold ALARM / SET button for
3 seconds.
(3) HI AL and upper temperature limit (CH
1-3: 70°C - default, IN: 60°C) start flash-
ing on the display.
(4) Press the CHANNEL /+ or MIN/MAX/-
button to adjust the desired upper
temperature limit.
NOTE: press and hold the MIN/MAX /- or
CHANNEL / + button for a fast running.
(5) press and hold the ALARM / SET button
12.04.2024 08:47:29 12.04.2024 08:47:29