Bresser ClimaTrend Hygro Quadro Manual De Instrucciones página 26

after setting the value when still flashing
to activate the alarm function.
(9) The alarm symbol (A10) appears on the
display.
(10) Save the setting with the ALARM / SET
button.
DISPLAY OF ADJUSTED ALARM VALUES
1. Press the ALARM /SET button in normal
mode to show the adjusted upper alarm limits
2. Press again the ALARM / SET button in
normal mode to show the adjusted lower
alarm limits
3. Press again this button to return to normal
display
DEACTIVATING /ACTIVATING THE ALARM
(1) Press the CHANNEL / + button until the ar-
row appears on the desired channel.
(2) Press and hold ALARM / SET button for 3
seconds.
26
Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 26 Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 26
(3) Upper Temperature Alert limit starts flash-
ing on the display
(4) In Temperature and Humidity Alarm Mode,
each press of ALARM / SET button rotates
between:
• Upper Temperature Alert
• Lower Temperature Alert
• Upper Humidity Alert
• Lower Humidity Alert
(5) When the above alerts are displayed,
pressing ALARM/SET button for 3 sec-
onds will deactivate/activate the corre-
sponding alert.
(6) The alarm symbol (A10) disappears/ap-
pears on the display.
(7) Save the setting with the ALARM / SET
button.
DISABLING WHEN ALARMS ARE ACTIVATED
Press ALARM/SET button to stop the alarm
12.04.2024 08:47:29 12.04.2024 08:47:29