Hisense Hi Move IV HVC676451DA Manual De Instrucciones página 29

For easier transport, some appliance parts are packed separately and safely placed in the main packaging unit. // Before first
use, read and follow the instructions for assembly and safe use. // The appliance is intended for dry vacuuming in a domestic
environment.
PARTS
1 Housing with the motor, battery and dust container
2 Suction hose
3 Motorised floor brush
4 2-in-1 nozzle
5 Longer narrow nozzle
6 Motorised nozzle for vacuuming textile surfaces
7 2x microfilter bag
8 Intelligent multipurpose station
INSTALLATION
Vacuum cleaner: Connect the upper part of the hose to the motor unit and the lower part to the floor
brush. The installation is correct when the appliance is firmly fixed all the way to the grooves (you hear
a slight click at all settings). // Due to its shape, the vacuum cleaner is not self-standing.
Intelligent multipurpose stand with accessories: Assemble it according to the illustrated instructions. //
A bag is stored in the upper compartment. // A space for two smaller attachments and for the motorised
nozzle for vacuuming textile surfaces is provided in the lower compartment. // Place the vacuum cleaner
on the multipurpose station. // Keep the intelligent multipurpose station at least 1 m away from any
heating bodies.
USE
Brushes and nozzles fit both the hose and the motor unit. // By pressing the button on the brushes and
nozzles, you can freely switch between them, as they are intended for various uses:
- The flexible hose is useful for vacuuming under sofas, cabinets, etc. // The hose can be folded by
pressing on the button on the hose. // If you wish to unfold it again, simply stretch it until it snaps in
place.
- The floor brush is used to vacuum all floor surfaces (vacuuming dry floor surfaces). Do not try to
vacuum high fibre carpets as they may become entangled in the roller brushes and damage the
vacuum cleaner.
- The textile surface nozzle comes in handy when vacuuming pet hair, sofas, beds, etc.
- The narrow nozzle is intended for vacuuming narrow hard-to-reach parts (corners, sofas, cobwebs,
behind radiators...).
- Nozzle with bristles (for frames, drawers...).
The intelligent multipurpose station can serve as a storage space for additional equipment,
emptying the dust container, and charging the vacuum cleaner. When you place the vacuum
cleaner on the intelligent multipurpose station, the vacuum cleaner lights up after a couple of
seconds and empties the dust container. The lower part of the lid opens and empties. The entire
process takes a maximum of 3-5 second (the green light is illuminated). // If you wish to perform
additional cleaning of the container, press and hold the on/off button on the screen for a couple of
seconds and the process will repeat itself // After the process is over, the vacuum cleaner charging
process will begin. If the lower lid of the container does not close automatically, close it as you take
the vacuum cleaner off the station. If the lid of the dust bag space is not closed enough, the red
light will start flashing.
CHARGING
The intelligent multipurpose station comes with a built-in charging cable. // Connect it to the mains,
at least 1 m away from any heating surfaces. // Make sure that the cable is plugged directly into the
mains, and do not use distributors and extension cords. // The intelligent multipurpose station is only
tailored for this model and cannot be combined with other models that do not have the same design.
// During charging, the battery percentage will appear on the vacuum cleaner display unit. // The
appliance cannot be switched on while charging.
29