OPERATION
1
On/off button.
2
The digital display shows several different functions of use:
-
Battery icon: battery charge in %
-
Crossed-out roller icon: when this icon is illuminated, a foreign body needs to be removed from
the brush.
-
Full container icon: the container needs to be emptied out.
-
Speed control knob and display icons: you can adjust the suction power with the knob // the
vacuum cleaner has three suction speeds. // You can choose between three different speeds (max
(up to 13 minutes), med (up to 20 minutes), min (up to 60 minutes))
DISPOSAL OF THE APPLIANCE
If you want to replace the appliance or no longer need it, you should also think about protecting the
environment.
The battery must be removed before disposing of the vacuum cleaner. // To safely remove the battery,
make sure that the battery is completely discharged. If the appliance does not have a removable battery,
follow the instructions given in the booklet with figures.
DUST CONTAINER AND FILTERS
1
Dust container and filters
Intelligent multipurpose station: The upper portion has a space for the bag where the dust from the
container is collected. Pull the bag out of the grooves and throw it in the trash. Additional bags are
enclosed to the kit. If you run out of bags, the bag code is written on the inside; you can use it to
purchase the bags in the store or order them online. // The filter, which you can also replace as
necessary, is located in the same part on the bottom.
Vacuum cleaner: remove the hose from the motor unit. // To clean the dust container, push the button
on the side of the motor unit. The pin releases the container. // First, lift the dust container at the bottom
of the container and then remove it from the motor unit at an angle. // Pull the rim with the filter out of
the container. // Turn the filter to the left in order to safely remove it from the rim. // The container,
sleeve and filter can be wiped, shaken or rinsed with lukewarm water, but be careful, as improper
handling can damage parts of the vacuum cleaner. // Ensure that all parts are completely dry before
reinstalling the container back onto the appliance. // To install the inner parts of the container,
reassemble the vacuum cleaner correctly, following the disassembly steps in the reverse order. // Make
sure that, when installing the dust container, you first install the container on the top part where a small
pin is prepared for this purpose; after that, attach the container back to the motor unit at an angle. //
Never vacuum without the dust filter inserted.
2
Replacing the filter
If you notice that the filter is damaged, replace it immediately. With regular use, we recommend
replacing the filter every 6 months to ensure the longest life of the vacuum cleaner.
30