Vaporesso GEN MAX/SE Manual De Instrucciones página 4

USER INSTRUCATIONS
1. Install the Tank
Install the tank to the battery by screwing the base of tank. Make sure they are firmly
connected.
2. Replace the Coil
- Unscrew the base from the tank;
- Pull out the used coil from the tank;
- Install a new coil to the tank;
- Reattach the thread base into place.
* Refer to the figure 1.
3. Fill E-liquid
- Push the refilling top cap.
- Fill e-liquid through the hole, then lock the top cap in place firmly after filling is finished.
- Please wait 5 minutes for the e-liquid to soak into the coil completely.
* Refer to the figure 2.
4. Adjust the Airflow
To adjust the airflow volume, please rotate the air-inlet ring on the top of the tank.
5. Power On/Off the Device
Power on/off: press the power button 5 times in 2s.
6. Power Adjustment
GEN MAX/SE is using the powerful GTi coil platform, and the suggested power need to
be noticed before start vaping.
GTi MESH Coils
Suggested Power
7. Start Vaping
Press the power button to enjoy extraordinary vaping experience.
8. Charge the Battery
After connecting the Type-C cable to the battery, the battery indicator and remaining
charging time will be showed on the screen.
9.Lock or unlock the device
Slide the lock button to lock the MOD, and slide back to unlock.
10. Choose a Mode
Press the power button 3 times continuously to enter the menu setting.
*F(t): F(t) MODE (DEFAULT)
F(t) MODE is by adjusting temperature, heating speed and time, F(t) mode releases
the flavors of e-liquid adequately, delivering the perfect balanced tasting experience
consistently from the first puff throughout.
*PUL: PULSE MODE
PULSE MODE is a mode to improve vaping experience through constant voltage
output, delivering optimal flavor production, throat hit, nicotine satisfaction, and perfect
temperature cloud continuously.
*ECO: ECO MODE
ECO MODE is a normal mode of output wattage, you can according to the coil
resistance to adjust the best wattage for your needs. The vaping time will last longer
than the F(t) and Pulse mode.
*VV: Variable Voltage Mode
In the Variable Voltage(VV) mode, the output mode of the device will change from
adjustable power output to adjustable voltage output, and the display units is voltage.
You can adjust it according to the coil resistance and the required voltage.
*THEMES: Themes Selection
You can choose your theme for your preference.
*Setting: SYSTEM SET
System setting includes Smart ON/OFF, Puffs, Brightness, LED Lights ON/OFF, Default
options.
SMART ON/OFF: when this function is on and a TANK is installed, the system will
recommend the best power automatically. Under the F(t), Pulse, ECO mode, press
"DOWN" and power button simultaneously, the smart function can be switch on or off.
(PS: THE SMART FUNCTION WORKS IN GTI COIL PLATFORM!)
Puffs: the 5 days' puff counter can be checked in this interface, also the puff can be
cleared after confirm the reset option.
GTi 0.2Ω MESH
60-75W
GTi 0.4Ω MESH
50-60W