Adler europe AD 2832 Manual De Usuario página 5

25.Do not wash blades in water.
26.Change the comb attachments only when the clipper is turned off.
PRODUCT DESCRIPTION (FIG. 1)
1. "On / off" button
4. Charging indicator 5. Charger
BATTERY CHARGING
Charge the battery before use. To start charging, plug the power cord into the trimmer socket and the charger into a
100-240 V 50/60 Hz power outlet. The charging indicator will light up (Fig. 1.4). The light will remain on until the
device is disconnected from the mains. The first charge takes 8 hours; subsequent charges should take 4 hours. A fully
charged battery is sufficient for about 180 minutes of continuous use. After charging, unplug the charger from the
outlet. If the trimmer is not used for a long time, charge it at least once every 6 months. To maintain adequate battery
capacity. If the battery is discharged, you can continue cutting with the charger. To do this, plug the charger cable into
the socket of the trimmer. After 2 minutes, you can continue cutting.
USING THE TRIMMER
Select the desired cutting length by turning the cutting length adjustment knob (Fig. 1.2), observing the adjustment
scale (Fig. 1.3).
To change the comb, turn off the trimmer, detach the comb (Fig. 5) and snap the right one (Fig. 4).
Start cutting by running the trimmer with the comb attachment in the direction of hair growth. This should be done
slowly and at a constant speed. Remember to regularly clean the trimmer and the cutting head of any hair.
CLEANING
Disconnect the device from the power source. Remove the cutting head (fig. 2). Clean the blade with the included
brush. After cleaning, no hair should remain between the blades. Lubricate the cutting head every few cuts by
dropping 2-3 drops of machine oil in the place shown in Fig. 6. Close the head (Fig. 3). Clean the housing with a dry
or slightly damp cloth.
Display information:
The display will show 4 pieces of information. 1.% Battery status when it reaches 0 the device will turn off. 2. Turbo
option the device will run at a higher speed. 3. Charging (icon will be red)% battery load will increase to 100%, then
turn green and flash. 4: and work under the power of the adapter (will turn green) and will not use the battery.
SPECIFICATION
Power: 3 W Maximum power: 40 W
Power supply: 230 V ~ 50Hz
For the sake of the environment. Cardboard packaging and polyethylene (PE) bags should be disposed
of in the appropriate containers for separate collection of municipal waste according to their description. If
there are batteries in the device, remove them and separately return them to the collection and storage
facility. Return the used device to a suitable collection and storage facility, as the hazardous substances in
it may pose a threat to health and the environment. The marking on the product indicates that the device
should not be disposed of in the container with municipal waste. Waste electrical equipment, is waste that
contains substances harmful to humans, animals and the environment. These substances can lead to
contamination of the soil, water or air, and through this they can get into the human body and lead to
numerous health ailments, such as: vision, hearing, speech disorders, they can also lead to kidney, liver
and heart damage, and cause skin diseases. Harmful substances can also have adverse effects on the
respiratory and reproductive systems and lead to cancerous changes. Consumption of plants growing on
the complained of soils, and products made from them may risk the above-mentioned health effects. Do
not dispose of the device in the municipal waste container!!!
2. Cutting length adjustment 3. Cutting length adjustment scale
6. Display
5