before removing obstruc-
•
tions or loosening block-
ages,
before checking the device,
•
cleaning it or performing
maintenance work on it.
After contact with a foreign
•
object,
if the machine begins to vi-
•
brate in an unusual way.
If the device starts to vibrate
•
abnormally, an immediate
check is required, remove the
battery and:
examine for loose parts and
•
tighten these,
search for signs of damage,
•
replace damaged parts.
•
contact the service centre.
If an accident or mal-
•
function occurs during
operation, switch off
the device immediately.
Injuries must be prop-
erly treated or medical
assistance sought. Read
the "Troubleshooting" section
to correct any malfunctions or
contact our Service Centre.
Only use accessor-
•
ies recommended by
PARKSIDE. Unsuitable ac-
cessories may cause electric
shock or fire.
Cleaning, maintenance
and storage
Switch off the drive and re-
•
move the battery. Wait until
all moving parts have stopped
and allow the device to cool
down when the device is
stopped for maintenance, re-
pair, storage or replacement
of an accessory.
Replace worn or damaged
•
parts in the interests of safety.
Use only original spare parts
and accessories. Using extern-
ally produced parts results in
the immediate loss of any war-
ranty claim.
Check and maintain the ma-
•
chine regularly. Only have the
machine repaired at an au-
thorised workshop.
Store the device out of reach
•
of children.
Residual risks
There will always be residual
risks even if you operate this
power tool according to the in-
structions. The following haz-
ards may occur in connection
with the type and design of this
power tool:
Eye damage if no suitable eye
•
protection is worn.
GB
MT
31