Descargar Imprimir esta página

Parkside PAMT 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 36

Desbrozadora multiusos a batería

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
GB
MT
Lawn edge trimming
Settings
To trim lawn edges, guide the device
slowly along the lawn edges.
• Position of motor head: 180° (see Ad-
justing the position of the motor head,
p. 33)
• Cutting angle position: 5 (see Adjusting
the cutting angle, p. 33)
• Spacer in resting position (see Adjust-
ing the spacer, p. 34)
Make sure that you are protected
from the cutting unit by the pro-
tective cover (17) when working.
Inserting and removing the
battery
 WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
NOTICE! Risk of damage! An incorrect
battery can damage the device and bat-
tery.
Inserting the battery
1. Push the battery (6) along the guide in-
to the battery holder (4).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release (7)
on the battery (6).
2. Pull the battery out of the battery hold-
er (4).
Switching on and off
 WARNING! Risk of injury due to un-
intentional continuous operation of the
tool. Before inserting the batteries into the
device, check that the on/off switch (3)
works properly and returns to the off posi-
tion when released.
36
 CAUTION! Ensure your stance is
stable and hold the device tightly with
both hands and away from your body. Be-
fore switching the device on, make sure
that it is not touching any objects.
 WARNING! Risk of injury due to re-
rotation of the cutting unit. Allow the cut-
ting unit to come to a complete stop. Keep
hands and feet away!
Switching on
1. Insert the rechargeable battery (6) into
the tool.
2. Press the switch lock (1).
3. Press and hold the On/off switch (3).
4. Release the switch lock (1).
Switching off
1. To turn it off, release the on/off switch
(3).
2. Remove the rechargeable battery (6)
from the device if you are leaving the
device unattended or if you have fin-
ished working.
Transport
Information on transporting the tool:
• Switch off the device and remove the
battery (6). Make sure that all moving
parts have come to a complete stop.
• Always carry the device with two
hands: one hand on the handle (2)
and the other hand on the auxiliary
handle (23).
Cleaning, maintenance
and storage
 WARNING! Risk of injury due to un-
intentional start-up. Protect yourself when
performing maintenance or cleaning work.
Switch off the device and remove the bat-
tery (6).

Publicidad

loading

Este manual también es adecuado para:

439318 2304