Publicidad
Idiomas disponibles
Idiomas disponibles
About the controls on the air conditioner—models with control knobs.
Features and appearance will vary.
MODE
High
Cool
Med
Cool
Low
Cool
MODE CONTROL
Controls
Mode Control
High Cool, Med Cool and Low Cool
provide cooling with different fan speeds.
Fan settings provide air circulation and
filtering without cooling.
NOTE: If you move the mode control from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool setting.
Cooling Descriptions
For Normal Cooling —Select High Cool or Med Cool
with the TEMPERATURE control at midpoint.
For Maximum Cooling —Select High Cool with the
TEMPERATURE control at the highest number
available on your knob.
For Quieter and Nighttime Cooling —Select Low
Cool with the TEMPERATURE control at
midpoint.
Controls
MODE
High
ON
Cool
Med
Cool
Low
Cool
6
OFF
High
Fan
Low
Fan
(on some models)
(on some models)
OFF
High
Fan
Low
Fan
TEMP
Coolest
7
1
6
3
5
4
TEMPERATURE CONTROL
TEMP Control
The TEMP control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. When you turn the knob to a
higher number, the indoor air will become
cooler. Turn the knob to a lower number and
the indoor air will become warmer.
ON/OFF Control
Turns air conditioner on and off.
NOTE: If the air conditioner is off and is then turned on while
set in a Cool mode, it will take approximately 3 minutes for
the compressor to start and cooling to begin.
2
Publicidad
