Max/Min Function; Rel Function - AEMC Instruments 514 Manual De Instrucciones

4.1.3

MAX/MIN Function

• This meter is built with MAX/MIN function at A
A and V
DC
• Pressing the MAX/MIN button once will set the meter
to MAX mode.
• Pressing it twice will set the meter to MIN mode.
• Pressing it three times will display the present reading
and still keep track of the MAX and MIN change. This
mode will also indicate a blinking MAX/MIN symbol.
• Pressing the MAX/MIN button for more than 2 seconds
will set the meter back to normal operation.
4.1.4

REL Function

• This meter is built with REL function at A
and V ranges.
DC
• Pressing the ∆REL button once will change the zero to
the present reading and the relative value will show on
the LCD.
• Pressing it twice will display the relative zero point. This
mode will also indicate a blinking
• Pressing the ∆REL button for more than 2 seconds will
set the meter back to normal operation.
12
ranges.
DC
symbol.
Clamp-on Meter Model 514
, V
AC AC
, V , A
AC AC DC
,