Diode Measurement - AEMC Instruments 514 Manual De Instrucciones

4.7

Diode Measurement

WARNING: Make sure that there is no power
in the tested sample or circuit (dead circuit).
• Turn the rotary range switch to the
• Insert red test lead to the red "+" input jack and the
black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
• If the polarity of the test leads are reversed with diode
polarity, the digital reading shows ≥ 3.0. This can be
used for distinguishing anode and cathode terminals
of a diode.
18
MODEL 514
®
TRMS CLAMP METER
I N S T R U M E N T S
600V CAT III 1000A
PEAK
1mS
HOLD
A
1000 V
400 W
40
OFF Hz
D
MAX MIN REL
2.80
V
20 30 40
0 10
600V CAT III 600V
1000V CAT II 1000V
600V
Clamp-on Meter Model 514
range.