Publicidad
Idiomas disponibles
Idiomas disponibles
EN
WORK AREA.
• Keep your work area clean and well lit. Messy tables and dark areas may cause accidents.
• Do not use the machine in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. The electric tool generates sparks that may cause fires.
• Make sure observers, children and visitors are away from the machine while you are
working with it. Distractions can make you lose control.
ELECTRICAL SAFETY.
WARNING:
• Avoid body contact with grounded surfaces such as pipes, radiators and refrigerators. There
is an increased risk of electric shock if your body is grounded.
• Do not expose the machine to rain or wet conditions. The entry of water into the machine
will increase the risk of electric shock.
• Do not misuse the cable. Never use the cable to carry the tool, and never pull the cable out
of the outlet. Keep the cable away from heat, oil, sharp edges and moving parts. Replace
damaged cables immediately. Damaged cables increase the risk of electric shock.
• When using the machine outdoors, use an outdoor extension cord. These extensions are
designed to work outdoors and reduce the risk of electric shock.
• Damaged power cords must be replaced by the manufacturer or its representative.
PERSONAL SAFETY.
•
Stay alert, watch what you are doing and use common sense when using the machine. Do
not use it if you are tired or under the influence of drugs, alcohol or medication. A
moment of distraction while working with the machine can result in serious injury.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be trapped by moving parts.
• Avoid accidental starting. Make sure the switch (4) is in the OFF position before plugging in
the machine. Plugging machines with the switch in the ON position may cause.
• Wear the appropriate personal protective equipment. Always wear eye protection. Dust
mask, non-slip safety shoes, helmet or hearing protection must be worn when necessary.
• Before connecting the machine to a power source (receptacle, outlet, etc.) make sure that
the voltage provided is the same as the one mentioned on the technical data plate of the
machine. A power source greater than that specified for the machine can cause serious
injury to the user, as well as equipment damage.
USE AND MAINTENANCE OF THE MACHINE.
•
Use jaws or some other practical way to secure and sustain the work piece to a stable
platform. Holding the work piece with your hands or against your body is unstable and
can lead to loss of control.
• Do not force the machine. Use the machine following the specifications. That way, the
machine will perform better and more safely the work for which it was designed.
• Do not use the machine if the switch (4) does not turn on or off. Any machine that cannot
be controlled with the on/off switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments, changing
accessories or storing the machine. These preventive measures reduce the risk of the
machine turning on accidentally.
29
Publicidad
