Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
We strongly advise you to read the comprehensive instructions for use including all warning and
safety notes before using the device for the first time! These brief instructions do not replace the
comprehensive instructions for use!
Remember that it may take a complete hair growth cycle (18-24 months) for hair removal to be
permanent.
WARNING:
Do not treat the same area of skin more than once per hair removal session! Treating an area
of skin more than once during a single hair removal session can increase the probability of side
effects. Try to avoid overlapping pulses.
Do not use the device on tanned skin or if you recently suffered from sun burn. Wait two weeks
following sunbathing before you use the device.
Unit description
Use
1
Before using the device you must
shave, clean and dry o a ected
areas as well as keep said areas dry
(do not apply perfume, make up,
powder, creams, etc.).
Brief instructions
IPL 10000+ hair removal
2
Check that the cartridge is correctly
plugged into the applicator.
GB
1 Base unit socket
2 Power switch
3 Applicator
4 Trigger button
5 Indicator lamp
6 Energy selection buttons
7 Energy indicator lamp
8 Indicator lamp for
"Cartridge empty"
3
Insert the mains cable into the base
unit socket. Insert the opposite end
of the mains cable into the socket.
Publicidad
