Time And Program Setting; Keypad Lock; Cleaning And Maintenance - Runtal FOLIO GLASS Serie Instrucciones De Uso

RUNTAL FOLIO GLASS

5.4 TIME AND PROGRAM SETTING

In any mode, by pressing the "Date" button, the date will start
flashing – the user will then be able to set the current date by using
the «Plus» or «Minus» buttons. The daily program will also be dis-
played.
By pressing the «Mode» button, the hour section will start flashing
and the user will be able to set the current hour by using the «Plus»
or «Minus» buttons.
By pressing the «Mode» button again, the minutes section will start
flashing and the user will be able to set the minutes by using the
«Plus» or «Minus» buttons.
When the Minutes section is flashing, by pressing the "Mode" button,
the user may proceed to set the Monday program and the "0 time"
point will start flashing. The user may then use the "Plus" or "Minus"
buttons to set the "Comfort temperature" or "Night temperature" to
current time (by pressing "Plus" the point indicating that at the cur-
rent time the "Comfort temperature" mode will be activated. While
by pressing the «Minus» button, the point will disappear to indicate
that at current time the "Night temperature" mode will be activated.
Subsequently, the point of the following hour will flash in the same
way for the setting.
By pressing the "Mode" button again, the subsequent day will be dis-
played and the user will be able to set, in the same way, the modes
for the hours from 0 to 23.
42

5.5 KEYPAD LOCK

By pressing the "Mode" and "Minus" buttons simultaneously for
3 seconds, the block symbol will be displayed and all buttons will be
locked. Thus, at the pressing of any buttons the remote control will
not respond.
By pressing once again the "Mode" and "Minus" buttons simulta-
neously for 3 seconds, the block symbol will disappear and the
buttons will go back to being operational.

6 CLEANING AND MAINTENANCE

Before starting any operation make sure that the equipment is com-
pletely cold and that it is disconnected from the mains.
For cleaning, use a soft damp cloth with a neutral detergent for
cleaning glass. Never use abrasive or corrosive cleaning agents or
solvents.
For technical issues, contact a qualified professional.
40016966 40016966
ENGLISH
43