Maintenance And Care; Servicing Guidelines; Important - Shindaiwa DH202 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Maintenance and care

Servicing guidelines

Area
Air filter
Fuel filter
Spark plug
Carburettor
Cooling system
Silencer
Gear housing
Starter
Blades
Fuel system
Screws, bolts and nuts

IMPORTANT

Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance. Record
dates of monthly and yearly inspections.
Maintenance and care
If you have any questions or problems, please contact your dealer.
Cleaning air filter
1. Air filter
2. Air cleaner cover
Cleaning fuel filter
1. Fuel filter
Maintenance
Clean/Replace
Inspect/Clean/Replace
Inspect/Clean/Adjust/Replace
Adjust/Replace and adjust
Inspect/Clean
Inspect/Tighten/Clean
Grease
Inspect
Inspect/Clean/Lubricate
Inspect
Inspect/Tighten/Replace
3. Cleaner cover knob
Maintenance and care
Page
Before use
18
18
20
19
19
19
21
• (15 - 20h)
22
20
20
-
NOTE
 If filter is excessively dirty or no longer fits properly, replace
it.
 Ensure that the filter is completely dry before reinstalling it.
1.
Close choke. Loosen cleaner cover knob and remove air
cleaner cover and air filter.
2.
Carefully brush dirt from filter or clean with a nonflammable
solvent if necessary. Dry it completely before installation.
3.
Reinstall air filter with cover, after installing air filter to cover.
1.
Pick up fuel filter through fuel tank opening with a piece of
steel wire or the like.
2.
Clean filter in a suitable cleaner or replace it if necessary.
3.
Reinstall the filter.
18
Monthly

Publicidad

Tabla de contenido
loading

Tabla de contenido