Transportation Kit Assembly - GENERGY NATURA Serie Instrucciones De Uso

4.2 Transportation kit assembly

Install the transport kit before refueling or oiling the equipment.
Slightly fit the generator so that the wheels can be installed comfortably.
1 Pass the m10x120 screw through the washer and cap.
2 Then pass de screw through the wheel and next by the hole purposely
provided on the frame.
3 Fix it with the M10 provided nut.
4 Repeat procedure for the second wheel
With the help of a second
person tilt the generator until it
rests on the wheels and frame.
Install supporting feet using
provided (M8x16)
according to the attached figure
and then fix with M8 nuts.
Replace the generator to its
normal position
screws
57