Battery Connection; Transportation Kit Assembly - GENERGY TAVASCAN Instrucciones De Uso

4 Checks prior to operation:

4.1 Battery connection.

Check that the engine switch is in
"OFF" or "0" position.
If you have any doubts to identify the
engine switch check chapter 3.1
PANEL DE CONTROL.
Loosen the support fastening bolts for
the battery, extract it and place it on a
leveled and secure surface.
NOTE: Respect the cable polarities, connect the red cable (+) to the red
terminal (+) of the battery and the black cable (-) to the negative (-) of the battery.
NOTE: Extreme precautions so as to not make unwanted contact with the
battery terminals and cables, among them or against a metallic part of the
machine.

4.2 Transportation kit assembly

Fastening the transportation wheels:
According to the figure below, screw the wheel axles on the machine riser and
fasten with the nuts. Then introduce the wheels in the axles and fasten with the
washer and nut
BATTERY
FASTENING BOLTS
WHEEL AXLE
7