Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The "Pre-Wash"
program is a convenience
feature
that allows dishes to be rinsed, when you don't have
a full load ready to be washed. (this prevents foods
from becoming dried!caked
on the dishes)
It is not necessary
to add detergent during the Pre-
Wash cycle. It is important to make sure the
incoming water is hot Open the hot water faucet and
run till hot, before connecting
the dishwasher
NOTE: At the beginning
of all programs,
the
dishwasher
starts in "drain"
mode.
The drain pump always retains a small amount
of
water (in the sump) from the previous cycle. This
is necessary to keep the pump primed. Don't be
alarmed if you see small amounts of water being
pumped-out
from the drain hose prior to the start
of the cycle, and!or water remaining
in the sump
area at the end of the cycle,, (THIS IS NORMAL)
NORMAL
WASH (ECONO MODE)
Water Temperature:
(Household
Temperature)
Program:
2 Wash & 2 Rinse Cycles
Water Consumption:
12.0 liters / 3.2US/gal
Length of Program :
42 min
SHORT WASH (ECONO MODE)
Water Temperature:
(Household Temperature)
Program:
1 Wash & 2 Rinse Cycles
Water Consumption:
9.0 liters / 2 4USlgal
Length of Program:
29 min
NORMAL WASH (SANI MODE)
Water Temperature:
160°F (71 °C)..
Program:
2 Wash & 2 Rinse Cycles
Water Consumption:
12.0 liters 13 2UStgal
Length of Program:
47min
The "Sani" feature utilizesa heating element to boost
(increase) temperature of the wash water upto 160°F
(71°C)
To activate this feature, push the "Sani/Econo"
button on the control panel.
. The red indicatorlight adjacent to the button
illuminates, indentifyingthe Sani feature is
selected,
To deactivate the Sani feature, push the
"Sani/Econo" button again and the indicatorlight
turns of[
• if you elect to use the "Econo° feature,
(no indicator light) dishes are washed using
standard (household) hot water only,
We recommend a minimum (household) water
temperature setting of 120°F (49°C) otherwise
washability may be compromised,,
SPECIAL NOTE: During the final rinse cycle of
the NORMAL/SHORTIRINSE programs, the
heating element is activated automatically,
irregardless of the °Sani/Econo" setting This
feature providesoptimum conditions for
dispursement of the rinse agent and accelerates
the drying time of the dishes.,
SHORT WASH (SANI MODE)
Water Temperature:
160°F (71 °C)
Program:
1 Wash & 2 Rinse Cycles
Water Consumption:
9 0 liters / 2 4UStgal
Length of Program:
29min
RINSE (SANIIECONO)
IDEAL FOR GLASSWARE
Water Temperature:
Program:
Water Consumption:
Length of Program:
(Household Temperature)
2 Rinse Cycles
Note: the 1st cycle can be
used as a wash cycIe.,
6,0 liters / t ,6US/gaL
20min..
NOTE: During the 1st cycle of the RINSE program,
the "sani° feature is not activated, irregardlessof the
"SANI/ECONO" setting
PRE-WASH
(ECONO MODE)
Water Temperature:
(Household
Temperature)
Program:
1 Rinse Cycle
Water Consumption:
3 0 liters / 0.79US/gal.
Length of Program :
6min
Publicidad
Tabla de contenido
