SEVERIN BA-3254 Instrucciones De Uso página 12

function can be very useful when the normal
amount of steam emitted is not suffi cient to
remove stubborn creases, or when ironing
diffi cult or thick fabrics.
Th e steam jet button can also be used for
diffi cult or hard-to-reach areas such as collars,
cuff s, pockets and around buttons. Th e steam
jet emitted from the tip of the soleplate makes
ironing easier and faster.
For optimum steam output, wait about 4
seconds before using this function again.
Th e steam jet function may also be used with
the iron held vertically, to remove creases or
wrinkles from fabrics.
Note:
For a more powerful steam jet, set the steam
control to 'dry ironing' .
Using the spray nozzle
Th e laundry can be dampened by pressing
the spray button. Th is will help to smooth
out diffi cult areas, and may be used at any
temperature during dry or steam ironing.
General care and cleaning
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
– If necessary, the unit may be wiped with a
dry lint-free cloth.
– Starch, fat and other deposits on the
soleplate may be removed with a woollen
cloth soaked in a vinegar/water solution.
Do not use abrasives or harsh cleaning
solutions.
Do not put vinegar or other descalers into
the water reservoir.
Self-cleaning system
Th e self-cleaning system fl ushes out loose
mineral deposits and keeps the appliance
free of lime and dust particles. Self-cleaning
should be carried out if the iron has not been
used for an extended period, or otherwise
every 10-15 days. Proceed as follows:
– Slide the steam control to 'dry ironing'.
– Fill the water reservoir with water up to
the maximum level mark.
– Place the iron on its base stand and put the
plug into the wall socket.
– Use the temperature button '
maximum temperature.
– Wait until the temperature symbol shows
steady.
– Remove the plug from the wall socket.
– Hold the iron horizontally over a sink.
– Press the SELF CLEAN button and keep it
pressed, while swinging the iron lightly to
and fro until no more steam or hot water
is emitted.
– Pour out any remaining water from the
reservoir.
– Allow the sole plate to cool down before
cleaning it with a damp, lint-free cloth.
Storage
Turn off the iron, remove the plug from
the wall socket and let the unit cool down
completely.
– Pour any remaining water out of the
reservoir through the water fi lling hole.
To avoid damage to the soleplate, store
the iron in an upright position on its base
stand.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
Th is product is guaranteed against defects
in materials and workmanship for a period
of three years from the date of purchase.
Under this guarantee the manufacturer
undertakes to repair or replace any parts
found to be defective, providing the product
is returned to one of our authorised service
centres. Th is guarantee is only valid if the
appliance has been used in accordance with
the instructions, and provided that it has not
been modifi ed, repaired or interfered with
12
+' to set the