Control Panel - Fender BASSBREAKER 18 Manual De Instrucciones

The Bassbreaker 18/30 is a dual-channel/dual-power combo
amp with terrific features and the sound of pure tube greatness.
Bassbreaker guitar amplifiers continue the acclaimed lineage estab-
lished by the great Fender Bassman® amp of the late 1950s, taking
classic Bassman design and "breaking" it with features including
unusual-for-Fender circuitry and components, dark gray tweed cov-
ering, refined pointer knobs, and the early Fender block-letter logo.
Bell-like clean tone comes from channel one, which is a 30-watt
version of the venerable Blackface Fender Deluxe. To easily crank
clean tone into warm, greasy overdrive, channel two is an 18-watt
version of the brown 1961 Deluxe amp. Four EL34 output tubes
provide aggressive midrange character, and vintage-style Fender
circuitry makes for notably pedal-friendly operation. Other features
include dual 12" Celestion® V-type speakers, an impedance select
switch, post power amp line output, and an included channel-select
footswitch. Bassbreaker 18/30 also pairs neatly with the Bassbreaker
BB-212 speaker enclosure.
Register your Bassbreaker 18/30 online at www.fender.com/product-registration.
FENDER MUSICAL INSTRUMENTS
0 10
INPUT VOLUME
A. INPUT: Plug instrument in here.
B. VOLUME: Adjusts channel one volume.
C. BASS, MIDDLE, TREBLE: Channel one tone controls.
D. CHANNEL TWO: Press to switch between channels;
illuminates when channel two is active.

The included FOOTSWITCH (O) can also be used to select channels.
E. VOLUME: Adjusts channel two volume.
F. TONE: Adjusts channel two tone. INPUT POWER
INPUT POWER
120V 60Hz
120V 60Hz POWER AMP
POWER AMP
175W
LINE OUT
TBDW
LINE OUT
FUSE
F3A L
250V
2

Control Panel

CHANNEL ONE / 30W
0 10 0 10 0
BASS MIDDLE TREBLE
PARALLEL
SPEAKER OUTPUTS
PARALLEL
30 WATTS 4Ω min TOTAL
SPEAKER OUTPUTS
POST MAIN EXTENSION
POST MAIN EXTENSION
SPEAKER SPEAKER
SPEAKER SPEAKER
MUTES
30WATTS 4Ω min TOTAL
INTERNAL
SPEAKER
CHANNEL TWO / 18W
CHANNEL
TWO
10 0 10
VOLUME
G. POWER INDICATOR: Illuminates when Bassbreaker 18/30 is on.
H. STANDBY: Standby mode (switch down) keeps tubes warm
and is used during short intermissions in lieu of turning amp
off. Deactivate standby mode (switch up) when resuming play.
When turning POWER on (I), put amp in standby mode for first 30
B A S S B R E A K E R 1 8 / 3 0
seconds, and also for 10 seconds before turning POWER off.

Using the STANDBY switch helps extend tube life by reducing
heat stress.
I. POWER: Turns Bassbreaker 18/30 on (up) and off (down).
4Ω - 8Ω -16Ω
4Ω - 8Ω -16Ω
IMPEDANCE
IMPEDANCE
SELECT
SELECT
BASSBREAKER 18/30
0 10
TONE STANDBY POWER
BASSBREAKER 18/30
TM
A PRODUCT OF:
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA U.S.A.
CORONA, CA U.S.A. MADE IN MEXICO
MADE IN MEXICO
FOOT
FOOT
SWITCH
SWITCH
TM
TM