Makita GA7020R Manual De Instrucciones página 11

2
3
4
5
011513
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
–
–
*1 Do not use Super flange and Ezynut together.
*2 In European countries, when using a diamond wheel, the ordinary guard can be used instead of the special guard
covering the both side of the wheel.
*3 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
6
7
8
9
10
Wheel guard for Depressed center grinding wheel / Multi-disc / Wire wheel brush
Inner flange / Super flange / Inner flange 102 (Australia and New Zealand only)
Depressed center grinding wheel / Multi-disc
Wheel guard for Abrasive cut off wheel / Diamond wheel
Inner flange / Super flange / Inner flange 78 (Australia and New Zealand only)
Abrasive cut off wheel / Diamond wheel
Outer flange 78 (Australia and New Zealand only)
ENG905-1
): 90 dB (A)
pA
): 101 dB (A)
WA
1
11
2
12
14
13
Side grip
*1
Lock nut / Ezynut
*1
Lock nut / Ezynut
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench
Dust cover attachment
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model GA7020R
Work mode: surface grinding
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K): 1.5 m/s
15
*2
*3
ENG900-1
2
): 8.0 m/s
h,AG
2
2
): 3.0 m/s
h,DS
2
11