Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Inglés_Maquetación 1 25/11/15 09:55 Página 68
INSTALLATION AND MAINTENANCE
Warnings:
• Observe all governing codes and ordinances.
• Do not use damaged or non-standard power cord.
• Be caution during installation and maintenance. Prohibit incorrect
operation to prevent electric shock, casualty and other accidents.
SELECTION OF INSTALLATION LOCATION
Basic requirement
Installing the unit in the following places may cause malfunction. If it
is unavoidable, please consult the local dealer:
1. The place with strong heat sources, vapors, flammable or explosi-
ve gas, or volatile objects spread in the air.
2. The place with high-frequency devices (such as welding machine,
medical equipment).
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
Requirement of air conditioner
1. Air inlet should be far away from obstacles and do not put any
objects near air outlet. Otherwise, it will affect the radiation of heat-
removal pipe.
2. Select a location where the noise and outflow air emitted by the
outddor unit will not affect neighborood.
3. Please try your best to keep far away from fluorescent lamp.
4. The appliance shall not be installed in the laundry.
REQUIREMENTS FORELECTRIC CONNECTION
Safety precaution
1. Must follow the electric safety regulations when installing the unit.
2. According to the local safety regulations, use qualified power
supply circuit.
3. For appliances with type Y attachment,the instructions shall con-
tain the substance of thefollowing.If the supply cord is damaged,it
must be replaced by the manufacturer, its service agent or simi-
larly qualified persons in order to avoid a hazard.
- 68 -
E
N
G
L
I
S
H
Publicidad
Tabla de contenido
