Electric Schematic Diagram - HJM ACP9000 Instrucciones De Uso

Inglés_Maquetación 1 25/11/15 09:55 Página 76
When the chassis is full with water, the buz-
●
zer will give out 8 sounds and "H8" is displa-
yed to remind user to discharge water:
- Move the unit to a suitable place for dis-
charging water; do not tilt the unit and keep
it horizontal during moving;
- Take the drainage pipe from the clip and
pull out the rubber plug on the drainage
pipe to discharge water;
- Put back the rubber plug onto drainage pipe
after finishing discharging water and then
fix the pipe on the clip;
- After full water protection is eliminated and
the compressor has been stopped for 3
minutes, the unit will resume operation.

ELECTRIC SCHEMATIC DIAGRAM

- 76 -
E
N
G
L
I
S
H